Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies.For example, turning inside and outside cylindrical surface, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread.
Product Parameters:
Model: WM210V
Motor: 110V brushless motor
Voltage: AC110V 50/60Hz
Power: 850W
Length of center: 15.7″(400mm)
Swing Over Bed: 8.3″(210mm)
Rotary diameter of tool rest: 5.51″(140mm)
Spindle bore: 1.50″(38mm)
Diameter of chuck: 4.92″(125mm)
Width of lathe bed: 3.94″(100mm)
Number of Spindle Speeds: Infinitely variable speeds
Spindle taper: MT5
Knife rest labour: Horizontal four-station
Spindle rotation speed: 50-2500rpm
Range of metric threads: 0.5-3mm
Range of Inch Threads(optional accessory ): 10-44T.P.I
Precision of the spindle: 0.01mm
Automatic feed range: 0.1mm-0.2mm
Maximum stroke of tool rest plate: 2.16″(55mm)
Maximum stroke of middle plate: 2.95″(75mm)
Maximum stroke of bottom plate: 10.87″(276mm)
Maximum stroke of tailstock sleeve: 2.36″(60mm)
Tail frame taper: MT2
Lathe sizes: 31.9″*11.8″*13.8″(81*30*35cm)
Package size: 35.4″*19.3″*17.7″(90*49*45cm)
Gross weight: 141lb(64kg)
Note:We provide optional parts for this lathe. If you need, please contact us.
Item Included(028284):
WM210V lathe * 1
Chuck Jaw * 3
Gear *4 (40/50/60/72)
The Screwdriver * 2
Open spanner *2
Hexagon Wrench *5
Oil can * 1
The Fuse * 1
Chuck Spanner *1
English Instruction Manual *1
- The lathe is used for all kinds of machining. It can be used for turning, facing, drilling, boring and turning thread. Also can be used for precision parts processing, sample processing and model. processing. Extensive use, simple operation, extensive processing.
- High frequency quenching process and precision grinding of high quality cast iron bed.
- Spindle is supported by precision taper roller bearing.
- The speed of the main shaft 50-2500rpm is divided into two gears, you can adjust the speed at will.
- We provide optional parts for this lathe. If you need, please contact us.
